Opens in a new window
Line 6 DT25 - 1x12 Combo
Additional Photos:
Sale Price: $1,099.00 CDN
Original Price: $1,499.00 CDN
or from $116 CDN/mo
If your tone is your masterpiece, the DT25 tube guitar combo amp is your paintbrush. This portable 25W/10W tube amp from Line 6 and tube-amp guru Reinhold Bogner gives you four stunning, lust-worthy amp voicings and unprecedented versatility that lay the foundation for you to build your perfect tone.
The powerful combination of reconfigurable analog components and HD modeling allows the DT25 combo to be four boutique tube amps in one, capable of producing stunning American cleans, British crunch, class A chime, and modern high-gain tones. Selectable operating class, power tube mode, and four Voicings (which offer the perfect combinations of negative feedback loop topology, and HD preamp and tone stack modeling) can dial in classic vintage tones or be shaped into highly customized originals and each one drips with boutique tone and touch-response.
The DT25 amp gets to the point. Its a simple, two-channel amp with a streamlined front panel. But if you connect a POD HD multi-effect pedal or POD HD Pro multi-effect rack to this little monster the two integrate to become a boutique tube amp factory!
Connected via exclusive L6 LINK technology, the DT25 amp and POD multi-effect rewrite the traditional amp/multi-effect paradigm and introduce powerful new concepts in control and customization. Add effects, additional amp voicings, foot control and instant scalability (including stereo operation with multiple DT25 amplifiers). DT25 is the perfect pairing for POD HD multi-effects. The days of plugging a POD into the front of an amp are over!
Revolutionary Bogner tube design meets Line 6 HD modeling
The Voicing switch is the heart of DT25 amp. It conjures the characteristic tone, feel and response that are at the heart of four celebrated amp voicings: American clean, British crunch, class A chime and modern high-gain. Different negative feedback loop topologies pair with HD preamp and tone stack modeling to produce the perfect tonal springboards for you to craft your perfect tones:
Voicing I: Classic American Clean (tight negative feedback loop)
Voicing II: British Crunch (medium negative feedback loop)
Voicing III: Class A Chime (zero negative feedback loop)
Voicing IV: Modern, High-Gain (resonant negative feedback loop)
Selectable operating class and power tube mode
Take your tone in many different directions with the selectable operating classes and power tube modes. Mix and match them with the Voicing switch to dial in truly unique tones. Or align the components in tried-and-true combinations to deliver fresh takes on the immortal classics.
Selectable operating classes Class AB/25 watts/fixed bias; Class A/10 watts/cathode biased
Selectable power tube modes Pentode; Triode
Any two amps you want, separated by a single channel switch
The two channels can be set to any combination of Voicing, operating class and power tube mode, so the channel switch is more like an A/B switch connected to two different amps. (Or, for a boost channel, set the channels the same with one a little louder.)
For example, set Channel A to a California clean tone. It can be complete with a high amount of negative feedback for a tight sound, characteristic class AB headroom and plenty of pentode-powered body. Set Channel B to deliver vintage Class A chime with zero negative feedback for an open, dynamic feel. Triode mode darkens the tone a bit and rounds off the edges, and Class A operation provides no shortage of touch sensitivity when you dig in with your pick. Thats total analog and digital reconfiguration in one touch.
DT25 amplifier + POD HD multi-effect = Boutique tube amp factory
DT25 amplifiers and POD HD multi-effects dont just connect, they seamlessly integrate to transform into a boutique tube amp factory capable of creating any tone you need with incredible tone and feel. POD HD multi-effects come to the party with additional models including 20+ HD amp models, 20+ HD guitar preamp-only models, huge collections of effects, cabs, mics and more. With a single L6 LINK connection, you get:
Automatic analog configuration. Select a POD HD amp model or preset and the DT25 analog components will automatically configure themselves to the appropriate operating class, biasing method, negative feedback topology and power tube mode.
Save custom analog configurations. Saving your custom DT25 configurations is as easy as saving POD HD presets. Tweak the DT25 amp settings, press Save on the POD HD multi-effect and incredibly unique and complex amp configurations can be recalled instantly.
No ground loops. Youll never get ground loop hum from an L6 LINK connection!
Features:
• Flexible tube section designed by tube-amp guru Reinhold Bogner
• Instantly reconfigurable per channel
• Selectable operating class (Class AB/25 Watts/Fixed Bias or Class A/10 Watts/Cathode Biased)
• Selectable power tube mode (Pentode or Triode)
• Four unique Voicings (negative feedback loop topologies paired with HD preamp and tone stack modeling):
• Classic American Clean/Tight NFL
• British Crunch/Medium NFL
• Class A Chime/Zero NFL
• Modern, High-Gain/Resonant NFL
• (1) 12AX7, (2) EL84 tubes
• Custom Celestion G12H90 speaker
• 4/8/16 ohm speaker outputs
• Series effects loop
• Intuitive, 2-channel design
• Back-lit front panel
• HD amp modeling technology fuels each Voicings preamp and tone stack, and automatically pairs them with corresponding Bogner-designed dynamic analog circuitry
• Modeled spring reverb with individual level control per channel
• Cabinet-simulated direct output
• Low Volume Mode provides cranked up tube tone at whisper-quiet volume
• Speaker jack-sensing provides relay driven output transformer protection circuit
• L6 LINK connects DT25 to POD HD for additional effects, amp voicings and instant scalability (including stereo operation with multiple DT25 amplifiers) all controlled by any L6 LINK equipped POD HD
• DT50/DT25 v2.0 firmware expands the HD preamp count from four to 30, lets you configure your own custom voicings, and more
The powerful combination of reconfigurable analog components and HD modeling allows the DT25 combo to be four boutique tube amps in one, capable of producing stunning American cleans, British crunch, class A chime, and modern high-gain tones. Selectable operating class, power tube mode, and four Voicings (which offer the perfect combinations of negative feedback loop topology, and HD preamp and tone stack modeling) can dial in classic vintage tones or be shaped into highly customized originals and each one drips with boutique tone and touch-response.
The DT25 amp gets to the point. Its a simple, two-channel amp with a streamlined front panel. But if you connect a POD HD multi-effect pedal or POD HD Pro multi-effect rack to this little monster the two integrate to become a boutique tube amp factory!
Connected via exclusive L6 LINK technology, the DT25 amp and POD multi-effect rewrite the traditional amp/multi-effect paradigm and introduce powerful new concepts in control and customization. Add effects, additional amp voicings, foot control and instant scalability (including stereo operation with multiple DT25 amplifiers). DT25 is the perfect pairing for POD HD multi-effects. The days of plugging a POD into the front of an amp are over!
Revolutionary Bogner tube design meets Line 6 HD modeling
The Voicing switch is the heart of DT25 amp. It conjures the characteristic tone, feel and response that are at the heart of four celebrated amp voicings: American clean, British crunch, class A chime and modern high-gain. Different negative feedback loop topologies pair with HD preamp and tone stack modeling to produce the perfect tonal springboards for you to craft your perfect tones:
Voicing I: Classic American Clean (tight negative feedback loop)
Voicing II: British Crunch (medium negative feedback loop)
Voicing III: Class A Chime (zero negative feedback loop)
Voicing IV: Modern, High-Gain (resonant negative feedback loop)
Selectable operating class and power tube mode
Take your tone in many different directions with the selectable operating classes and power tube modes. Mix and match them with the Voicing switch to dial in truly unique tones. Or align the components in tried-and-true combinations to deliver fresh takes on the immortal classics.
Selectable operating classes Class AB/25 watts/fixed bias; Class A/10 watts/cathode biased
Selectable power tube modes Pentode; Triode
Any two amps you want, separated by a single channel switch
The two channels can be set to any combination of Voicing, operating class and power tube mode, so the channel switch is more like an A/B switch connected to two different amps. (Or, for a boost channel, set the channels the same with one a little louder.)
For example, set Channel A to a California clean tone. It can be complete with a high amount of negative feedback for a tight sound, characteristic class AB headroom and plenty of pentode-powered body. Set Channel B to deliver vintage Class A chime with zero negative feedback for an open, dynamic feel. Triode mode darkens the tone a bit and rounds off the edges, and Class A operation provides no shortage of touch sensitivity when you dig in with your pick. Thats total analog and digital reconfiguration in one touch.
DT25 amplifier + POD HD multi-effect = Boutique tube amp factory
DT25 amplifiers and POD HD multi-effects dont just connect, they seamlessly integrate to transform into a boutique tube amp factory capable of creating any tone you need with incredible tone and feel. POD HD multi-effects come to the party with additional models including 20+ HD amp models, 20+ HD guitar preamp-only models, huge collections of effects, cabs, mics and more. With a single L6 LINK connection, you get:
Automatic analog configuration. Select a POD HD amp model or preset and the DT25 analog components will automatically configure themselves to the appropriate operating class, biasing method, negative feedback topology and power tube mode.
Save custom analog configurations. Saving your custom DT25 configurations is as easy as saving POD HD presets. Tweak the DT25 amp settings, press Save on the POD HD multi-effect and incredibly unique and complex amp configurations can be recalled instantly.
No ground loops. Youll never get ground loop hum from an L6 LINK connection!
Features:
• Flexible tube section designed by tube-amp guru Reinhold Bogner
• Instantly reconfigurable per channel
• Selectable operating class (Class AB/25 Watts/Fixed Bias or Class A/10 Watts/Cathode Biased)
• Selectable power tube mode (Pentode or Triode)
• Four unique Voicings (negative feedback loop topologies paired with HD preamp and tone stack modeling):
• Classic American Clean/Tight NFL
• British Crunch/Medium NFL
• Class A Chime/Zero NFL
• Modern, High-Gain/Resonant NFL
• (1) 12AX7, (2) EL84 tubes
• Custom Celestion G12H90 speaker
• 4/8/16 ohm speaker outputs
• Series effects loop
• Intuitive, 2-channel design
• Back-lit front panel
• HD amp modeling technology fuels each Voicings preamp and tone stack, and automatically pairs them with corresponding Bogner-designed dynamic analog circuitry
• Modeled spring reverb with individual level control per channel
• Cabinet-simulated direct output
• Low Volume Mode provides cranked up tube tone at whisper-quiet volume
• Speaker jack-sensing provides relay driven output transformer protection circuit
• L6 LINK connects DT25 to POD HD for additional effects, amp voicings and instant scalability (including stereo operation with multiple DT25 amplifiers) all controlled by any L6 LINK equipped POD HD
• DT50/DT25 v2.0 firmware expands the HD preamp count from four to 30, lets you configure your own custom voicings, and more
Q & A
There are currently no questions for this product.
Reviews
3.137.176.28
Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; [email protected])
A Seriously Toneful Amp for a great price! Get 2 in stereo! 10 of 10 customers found this review helpful
Features
Quality
Value
Overall
Product Experience I own it
Closest Store Scarborough, Ontario
The DT25 is a remarkable achievement! I've owned a Fender Twin Reverb and this amp can sound identical to it. I've played through 8X12 stack of Cerwin Vega's with monster distortion and this amp sounds better in that High-Gain mode.
The power tubes give this amp serious tone and the combination digital preamp modelling with tube preamp give serious sonic flexibility with classic tones (you'll think you're playing the original amps).
I own the POD HD500X and was intrigued by the L6 link capabilities so I checked it out and was astounded by the solid clear, punchiness of this amp. I am blown away by the extreme variety of tones you can achieve, with instant recall, and they all sound amazing.
I was so blown away by this amp that came back to the store to buy another one for an incredible stereo setup!!!
Now I can run 2 different amp models at the same time with stereo effects such as panning back and forth, the choruses sound SO much more lush and I can edit everything on the computer program via USB from the POD. For me this is a dream setup!!!
Imagine running the sound of a Marshall on one side together with a VOX chime on the other, cleaned up a bit.
Throw in stereo digital delay and Hall reverb and be prepared to fly!
Even without any POD, this amp sounds killer!!!!
Just pickup a Boss FS-6 Dual Footswitch and switch between channel A or B (each can have a completely independent setup) and switch the reverb on/off.
I'm playing an Ibanez RG, Fender Strat, Ibanez jazz guitar and a handmade guitar with a Dimarzio Super Distortion.
I highly recommend you get one immediately! Actually....
I highly recommend you get TWO!!!
Posted by Michael on Apr 9, 2017
DT25 Combo 4 of 4 customers found this review helpful
Features
Quality
Value
Overall
Product Experience I own it
Closest Store Scarborough, Ontario
Overall great value in an AMP - Tone is lush and very saturated on all 4 voicings.
Built in reverb is ok. I prefer the models built in to my POD HD500
I don't like the built in speaker - I am exchanging my combo for the head as I prefer my Eminence Swamp Thang and Texas Heat equiped cab and will not need it.
If you are using the L6 Link, be sure to order a radial (mogami) AES/EBU digital interface cable (at least 15 feet) or a DMX cable. Line6 documentation suggests any mic cable will work - and they do, but depending on the quality of the cable there will be alot of interferance and signal noise. The mic cable is shielded diferently. The AES cable has a mesh shielding designed for a digital signal where as the standard mic cable has shielding designed for the analog signal.
L&Q only had the combo in store so I had to order the head from the supplier (waiting for it now!)
Posted by Gary Maki on Jun 6, 2012
Available In Gear Hunter
Sale Price: $999.00
Store Location: Saskatchewan, Saskatoon, 721 43 Street E, S7K 0V7
Email: [email protected]
Phone: (306) 664-1966
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| DT25 - 1x12 Combo | 355298 |
