Mackie 2404-VLZ4 24-Channel 4-Bus Compact Mixer with USB
Additional Photos:
Product Videos :
Now featuring Mackie's flagship Onyx mic preamps, the comprehensive Mackie VLZ4 line delivers the proven feature set, high-headroom/low-noise design and "Built-Like-A-Tank" construction that created an industry more than 25 years ago.
From every input to every output, VLZ4 is optimized to deliver professional-quality results each and every time.
Incomparable Sound Quality
VLZ (standing for very low noise) mixers are designed to deliver the best quality audio no matter the application you choose to use it for, with 128.5 dB dynamic range. 60 dB gain-range delivers the best quality sound from virtually any microphone. With +22 dBu signal levels, you can be reassured connecting high-output sources without distorting your inputs.
High Headroom & Low Noise
Strict attention to component quality has led to innovations like the custom M80 op-amps and class-leading negative summing bus architecture
USB Capability
The2404-VLZ4 also features 4x2 USB recording and playback functionality. Record up to 4 signals simultaneously with a stereo mix returned to the mixer for playback.
Features
• 24-Channel mixer with high-headroom and low-noise design
• 20 boutique-quality Onyx mic preamps
• Improved RF rejection, perfect for broadcast applications
• Phantom power for condenser mics
• 3-Band EQ (80 Hz, 2.5 kHz, 12kHz)
• 6 AUX sends, level, pan and PFL solo on each channel
• 2 stereo returns and 4 group outs with inserts
• High-resolution 12-segment stereo meters
• Sealed rotary controls resist dust and grime
• High-visibility, high-contrast controls deliver convenient visual feedback
• Integrated 4x2 24-bit USB interface
• PFL/AFL Solo modes
Specifications
Main Mix at Unity, Channel Faders Down: -87.0 dBu (-91 dB signal to noise ratio, ref +4 dBu)
Main Mix Fader at Unity, Channel Faders at Unity: -81.5 dBu
Total Harmonic Distortion (THD): Microphone Pre @ Insert: < 0.0007%
Crosstalk / Attenuation:
Channel Alt / Mute Switch Engaged: -90 dBu
Channel Fader Down: -88 dBu
Frequency Response: Microphone Input to Main Output (Gain at Unity):
+0, -1 dB, 20 Hz to 50 kHz
+0, -3 dB, 100 kHz
Equivalent Input Noise 150 Ω Termination: -128.5 dBu, 20 Hz to 20 kHz
Microphone input to insert send out, maximum gain
Common Mode Rejection Ratio: Better than -70 dB @ 1 kHz
Maximum Levels
Microphone In: +21 dBu
All Other Inputs: +21 dBu
Main Mix XLR Out: +27 dBu
All Other Outputs: +21 dBu
Impedances
Microphone In: 2.7 kΩ
Channel Insert Return: 2.5 kΩ
All Other Inputs: 10 kΩ or greater
Tape Out: < 10 Ω
All Other Outputs: 120 Ω
Equalizer
High Shelving: +/-15 dB @ 12 kHz
Mid Peaking: +/-15 dB @ 2.5 kHz
Low Shelving: +/-15 dB @ 80 Hz
USB
Format: USB 1.1
I/O: Stereo Input, 4-Channel Output
A/D/A: 24-bit, 44.1 kHz / 48 kHz
Power Consumption: 55 W, 100 to 120 VAC, 50 to 60 Hz
Operating Temperature: 32 to 104F (0 to 40C)
Fuse Rating: 100 to 120 V: 500 mA slo blo, 5 x 20 mm
220 to 240 V: 250 mA slo blo, 5 x 20 mm
Dimensions: 29.4 x 19.1 x 6.0" (74.8 x 48.6 x 15.3 cm)
Weight: 31 lb (14.1 kg)
Media
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.