Audient Nero Desktop Monitor Controller
Additional Photos:
Inputs
As your studio grows it becomes harder to control. Nero enables you to centralise, connect and control all your monitoring needs from your desktop using Nero's array of stereo inputs.
Outputs
Reference your mixes on up to three sets of speakers, independently set and match volume for all speakers and audition and assign your sub to any monitor path. Nero also provides one dedicated monitor grade headphone amp and three foldback grade headphone amps, making sure you're ready to take on the loudest of sessions with crystal clear headphone mixes.
Smart Touchpoints
Smart Touchpoints enable you to customise your workflow on the fly. Easily route and configure Nero's outputs and monitor controls to create monitoring combinations that suit your needs. Simply hold down a Smart Touchpoint to put it into setup mode, select your routing options and press it again to save.
Precision Matched Stereo Volume Control
Nero perfectly matches the volume of the left and right channels of your stereo signal using Audient's custom Precision Matched Attenuation Technology. Unlike other monitor controllers, this prevents any deviation in volume between your left and right monitors or unbalancing of your stereo image, enabling you to monitor accurately and mix with confidence.
Features
• 4 x Stereo Analogue sources
• 2 x Line Level Inputs
• 1 x Dedicated Cue Mix Input
• 1 x Aux Input (RCA or Mini Jack)
• Optical & Coaxial S/PDIF Inputs
• 3 x Stereo Speaker Outputs
• 1 x Assignable Sub Output
• 4 x Headphone Outputs with flexible routing
• Smart Touchpoints for user customisation
• Talkback Input
• Internal Microphone
• External Talkback Input
• Dim, Cut, Mono & Polarity Monitor Controls
Specifications
Balanced Line Inputs
NOMINAL INPUT LEVEL: +4dBu
MAX INPUT LEVEL: +18dBu
CMRR: > 50dB
MIC EIN: -128dBu
CMRR: > 80dB @ 1kHz
Unbalanced AUX Inputs
NOMINAL INPUT LEVEL: -10dBV
MAXIMUM INPUT LEVEL (minimum trim): +27dBu
TRIM RANGE: +/-12dB
Digital Inputs
INPUTS: TOSLINK and Coaxial
FORMAT: S/PDIF
SAMPLE RATES: 44.1kHz - 192kHz
BIT DEPTH: up to 24bit
Talkback Inputs
MAXIMUM IPUT LEVEL: 2dBu
GAIN: 4-44dB
PHANTOM POWER: +48V
Speaker Outputs
MAXIMUM OUTPUT LEVEL: +12dBu
Headphone Outputs
MINIMUM LOAD: 12.8Ohms
Performance
Speaker Outputs
THD+N: 0.0015% 0dBu 1k input
SNR: 100dBu
CROSSTALK (SPEAKERS): > 100dB
FREQUENCY RESPONSE: 20Hz - 22kHz +/-0.5dB
ATTENUATION AT MIN VOLUME (SPEAKER OUTPUTS): > 110dB
DAC
THD+N: < 0.0017%
DYNAMIC RANGE: 113dB
FREQUENCY RESPONSE: 20Hz - 22kHz +/-0.5dB
Headphone Outputs
THD+N @ 0dBu (output level):
0.009% - 30Ohm
0.009% - 60Ohm
0.008% - 600Ohm
PEAK POWER OUTPUT:
90mW - 30Ohm
56mW - 60Ohm
7.35mW - 600Ohm
CROSSTALK: > 62dB
ATTENUATION AT MIN VOLUME: > 96dB
Power Supply: 12VDC Centre Positive DC Adapter - 2Amps
Weight: Unit: 2 kg (4.4 lb)
Dimensions: 25.5cm x 15.5cm x 7.5cm (10" x 6.1" x 3")
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.