Tascam Model 24 Multitrack Recorder with Integrated USB Audio Interface and Analog Mixer
Additional Photos:
The TASCAM Model 24 was developed for easy and immediate operation, with everything you need placed right at your fingertips. 100mm faders allow for precise control over volume. A full set of familiar EQ and Auxiliary knobs remove the need for menu diving, and all input/output connections are all on the surface for quick and easy access.
Featuring 16 high-grade TASCAM mic preamps in addition to multiple sets of stereo line inputs, the Model 24 delivers studio quality audio performance right from the start. When it's time to record The TASCAM Model 24 allows musicians and engineers to capture up to 24 tracks simultaneously (at 24bit/48kHz resolution) directly to the SD card, with the ability to support punch in/out 8 tracks at the same time. And once the take is done, the Model 24 can easily playback any or all of the recorded tracks through the console for immediate mixdown.
Flexible Connectivity
In addition to the studio quality mic preamps and powerful EQ and routing options the Model 24 features a dedicated stereo channel 1/8", dual RCA Bluetooth(TM) connectivity. This allows users to easily integrate mobiles devices into the mix for rehearsal playback, walk-in music and more. Finaly, the TASCAM Model 24 can also act as a powerful audio interface and will connect directly to your PC or Mac for easy integration with your DAW of choice.
Features at a glance
• All-in-One, Multitrack Recorder with 22 channel Mixer and USB Audio Interface
• WAV 48kHz/24-bit, 24 channel multitrack recording to SD, SDHC and SDXC cards
• Built-in USB Audio Interface to send/receive audio data to/from DAW
• 22 Inputs (20 Balanced, 12 Monaural, and 4 Stereo)
• 16 TASCAM Microphone Preamps
• Input Mode switch on every input channel
• TASCAM Ultra-HDDA Mic Pre-amp (Channels 1 to 12)
• Preamp Gain Controller with Overload indicator (Channels 1 to 12)
• 3-band EQ with a sweepable mid-range frequency (Channels 1 to 12)
• 100kHz Low-cut Filter (Channels 1 to 12)
• 7-band Graphic EQ
• 16 Pre-set Effects
• 100mm Long-throw Faders for precise adjustment
• Mute, Main/Sub, PLF switches on every input channel
• Bluetooth input supporting both AAC and SBC codecs
• SUB Outputs via XLR Balanced and RCA Unbalanced connectors
• LINE Inputs via RCA Pin and ⅛" Stereo Mini jacks
• 3 AUX Outputs (Monitor 1, Monitor 2, FX)
• 1 Stereo Output for Control Room
• Phantom Power (+48V)
• 1/4" Stereo Headphone Output
• Backlit buttons for key operations such as REC and Play
• Multi Jog-dial for quick menu operation
• 12-segment LED Output Level Meters
System Requirements
Windows
Supported OS: Windows 10 (April 2018 Update) New, Windows 8.1, Windows 7
Compatible Computers: Windows-compatible computer with a USB2.0 port
CPU: Dual core / 2GHz or faster
Memory: 2GB or more
Driver: USB Audio Class 2.0, Model 24 ASIO2.0, WDM (MME)
Screen Resolution: 1280 800 Dots or more
Macintosh
Supported OS: macOS High Sierra (10.13), macOS Sierra (10.12), OS X El Capitan (10.11)
Compatible Computers: Apple Macintosh computer with a USB2.0 port
CPU: Dual core / 2GHz or faster
Memory: 2GB or more
Driver: Core Audio
Screen Resolution: 1280 800 Dots or more
Q & A
- asked on Apr 21, 2024
https://tascam.com/us/product/model_24/spec
- answered by Loudon Sharp
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.