Rupert Neve Designs RMP-D8 8-Channel Dante Mic Pre
For the last decade, the world's leading live sound engineers have chosen Rupert Neve Designs as some of the only analog equipment to accompany their digital touring rigs. With mastering-grade 24-bit 192kHz converters and full Dante integration, the RMP-D8 finally offers the live sound world something that studios have always coveted: the sound of Rupert Neve Designs.
Classic Rupert Neve Tone
The heart of the RMP-D8 lies in the modular mic preamp cards featuring Mr. Rupert Neve's custom transformer designs. Unlike other integrated Dante mic preamp designs that rely primarily on a single IC for gain & tone, each channel on the RMP-D8 has a fully-realized class-A microphone preamplifier feeding a custom transformer, maintaining the high standards of Rupert Neve Designs' standalone preamplifiers.
Mastering-Grade Conversion
Where converters are often an afterthought on combination devices, the 24-bit/192kHz converters in the RMP-D8 are a product of years of careful listening. The precision controlled internal clocking and enhanced jitter reduction enable capture of the full breadth of performance from the exceptional mic preamplifiers; with the RMP-D8, there is no weak link in the audio path.
The New Dante Standard
Dante audio networking uses standard IP networks to transmit high-quality, uncompressed audio with near-zero latency. It's the most flexible, reliable, and easy-to-manage audio networking solution available, and provides the lowest cost of ownership by dramatically reducing cabling and labor costs. Dante is the audio networking choice of nearly all professional audio manufacturers, making it the industry standard for digital audio networking.
The RMP-D8's audio signal will work with any Dante device across settings ranging from concert halls to arenas, clubs, studios, houses of worship, and educational facilities. All in all, the RMP-D8 brings the classic sound of Rupert Neve Designs into the Dante-connected world.
Features:
• 8 mic / line inputs with 48V phantom power, polarity reverse, input pad & high-pass filter controls
• 1dB-stepped class-A mic preamplifiers with 60dB gain and remote control capability
• Custom Rupert Neve Designs transformers for the larger-than-life tone of Rupert's classic modules
• 24-bit / 192kHz Mastering-Grade Converters with precision-controlled internal clocking and enhanced jitter reduction
• Ultra-reliable, redundant power supplies capable of operating anywhere in the world
• Dante integration with redundant network ports for reliability
• Gain-compensated secondary output
• 4 dual-channel AES outputs on XLR connectors
• Large OLED display with full local control, accurate and easy-to-read meters
• Compatible with Dante Virtual Soundcard and Dante Via for direct computer integration
• Reinforced steel chassis for enhanced RF shielding and rugged touring use in challenging environments
Specs:
• Noise: 150 Ohm Balanced Source, AES Output, 22 Hz to 22 kHz, un-weighted +60dB Gain: -91 dBFS
• Unity Gain: -110 dBFS
• Frequency Response - 0dBu, Unity Gain: 50 Hz to 12.5 kHz: -0.1 dB, 20 Hz: -0.5 dB, 40 kHz: +0.2 dB
• Input Impedance: 5.5 kOhms
• Gain: 0 to 60 dB in 1 dB steps
• High Pass Filter: -3dB @ 80 Hz, 12 dB/Octave Slope
• Pad: -10 dB
• Signal to Noise Ratio: 84.4 dB
• Dynamic Range: 110 dB
• Maximum Input Level: +25.5 dBu
• Power Cord Type: IEC Standard 3 Pin 18AWG Latching Type
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
- USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.