IK Multimedia iRig Stomp I/O Pedalboard Controller
Additional Photos:
Product Videos :
With its combination 1/4" XLR input, iRig Stomp I/O lets you easily record with a guitar, bass, synth, keyboard or microphone - including studio condenser mics requiring 48V phantom power using its 96kHz/24-bit audio interface on iPhone/iPad, Mac and PC. It has a Class A preamp with gain control and an output level control with VU metering for both input and output levels. The integrated 1/4" headphone output allows for monitoring the signal during tracking or when practicing, while the balanced stereo output can be used to send the signal to an amplifier, a mixer, a PA or powered speakers.
iRig Stomp I/O is designed to give electric and acoustic guitarists, bass players, vocalists, and songwriters a new way to have full control over their tone in any situation. Furthermore, iRig Stomp I/O offers the unique advantage of getting the same sound on stage as in the studio with a solution that is easily updatable as new software and features are released, making it a future-proof system.
iRig Stomp I/O Specifications
• 4 x Metal foot switch with two-colour status LED
• Conversion: 24-bit A/D, 24-bit D/A
• Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
• Power: USB bus powered (when used with a computer) or DC IN
• Device Connection: USB B-Type and Mini-DIN
• Enclosure: metal sheet
Microphone Input
• Connector: balanced female 3-pin XLR
• Microphone Input Impedance: 3.2 kOhms
• Gain Range: 46 dB
• Phantom Power: +48V 4V
• Frequency Response: 20 Hz 20kHz +/-1.5dB
• Input Noise: -100 dB RMS
Instrument Input
• Frequency response: 20 Hz 20kHz +/-1.5dB
• Input Noise: -100 dB RMS
Stereo Headphone Output
• Connector: 1/4" TRS Jack. Tip: right / Ring: left / Shield: ground
• Headphone Level control: potentiometer
• Headphone Output Power: 100mW into 50Ohms
Stereo Line Output
• Connector: 2x balanced female 1/4" TRS Jack. Tip: hot / Ring: cold / Shield: ground
• Maximum Output Level: +13 dBu into 600 Ohms balanced load
• Frequency Response: from 10 Hz to 21 kHz (+/- 0.2dB)
• Output Dynamic Range: 102 dB(A)
• Output Impedance: 150 Ohms balanced
• Floating Balanced Outputs
MIDI Input/Output
• Connector: 2x 5-pin DIN
Connections and Controls
• Neutrik Combo socket for MIC input and Instrument input (auto selecting)
• +48V phantom power switch
• 1/4" headphones output
• 2 x 1/4" TRS Balanced floating line outputs
• MIDI I/O 5-pin DIN connectors
• 2 x 1/4" TRS External controllers sockets
• B-Type USB socket for connecting a computer (Mac/PC)
• Mini-DIN "iOS" connector for connecting an iOS device
• Barrel DC-in socket for powering up the Stomp I/O and charging the iOS device at the same time
Package includes
• iRig Stomp I/O
• Lightning to Mini-DIN connection cable (60cm/23.62")
• USB A-Type to USB B-Type connection cable (2.5m/8.2ft)
• DC power supply
Dimensions
• Size: 41.5cm / 16.3" x 21cm / 8.5" x 7.2cm / 2.83"
• Weight: 3.2kg / 7.1lb
Device Compatibility
• iOS: Compatible with iPhone 8 Plus, iPhone 8, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPod touch 6th generation, iPod touch 5th generation, iPad Pro (10.5-inch), iPad Pro (12.9-inch) 2nd generation, iPad Pro (12.9-inch) 1st generation, iPad Pro (9.7-inch), iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad mini, iPad 5th generation, iPad 4th generation. iOS 6 or later is required.
• Mac: macOS 10.6 or later. One free USB port.
• Windows: Fully supports Windows 10 WASAPI for low latency audio. One free USB port. (ASIO4ALL is required on Windows 7 and 8 for low latency audio)
Media
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| iRig Stomp I/O Pedalboard Controller | 689033 |
